Inserting The Memory Card; Using The Anti-Scratch Mask - Samsung SL600 User Manual

Connecting to a Power Source
Ê Insert the battery as shown
- If the camera does not turn on
after you have inserted battery,
please check whether the
battery (+ / -) direction is right.
- When the battery chamber
cover is opened, do not force
the battery chamber cover,
this may damage it.
Ê There are 4 indicators for battery condition that are displayed on
the LCD monitor.
Battery
indicator
Low battery
Battery
The battery is
status
fully charged
recharge or use
spare battery)
When using the camera and the battery in a place that is excessively cold or hot,
Ä
the battery status on the LCD may be different from the actual battery status.
Low battery
capacity capacity
(Prepare to (Prepare to
recharge or use
spare battery)

Inserting the memory card

Ê Insert the memory card as shown.
- Turn off the camera's power
before inserting the memory card.
- Have the front label of the
memory card facing toward the
front of the camera (Lens) and
the card pins toward the back of
the camera (LCD monitor).
- Do not insert the memory card
the wrong way round.
Doing so may damage the
memory card slot.

Using the Anti-scratch Mask

Ê Insert the anti-scratch mask as shown.
- Using the anti-scratch mask
can protect the camera from
accidental scratches.
Battery empty
Make sure two points of
(Recharge
holes in the camera body are
or use spare
connected to the anti-scratch
battery)
mask.
015