Advertisement
Multi-display 10-Channel and 16-Channel Timers
755-HM10 and 755-HM16
or
•
When a channel's timing cycle has been activated its individual
display will show the timing countdown of that channel.
•
If the time is in Hours-Minutes (H:M) the colon in the middle of
the 4-digits will flash. If the time is in Minutes-Seconds (M:S)
the colon in the middle of the 4-digits will be on continuously.
•
At the conclusion of a timing cycle the display flashes "0".
•
At the conclusion of a timing cycle the display will show either
"diSc" for discard or "donE" for done. This indication is
programmable.
Each of the channels of the 10-Channel or 16-Channel timers
operate in an identical manner.
Press a channel button to activate a timing cycle (a short beep
sounds). The timers can be programmed to count up to a selected
value or count down to 0:00.
NOTE: To cancel any operation in progress, press the related
channel button three times in quick succession (less than three
seconds). The channel LED turns off and the LED of the next
channel with the lowest countdown remaining will blink.
At the conclusion of a timing cycle the display will show either
"diSc" or "donE" depending on how it is programmed.
Two different timing cycles can be setup for each channel. These
are called "Menu 1" and "Menu 2". To change from one menu to the
other, all channels must be idle. Simultaneously press both the UP
and DOWN buttons for 6 seconds. The display will change between
the single-line display (Menu 1) and the three-line display (Menu 2).
Printed in USA 3/06 © 2006
(Menu 1)
(Menu 2)
Operation
Channel Defaults
Cycle Time
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Bold italic times are in Hours:Minutes. All other times are in
Minutes:Seconds. Alert time = 0 (feature turned off).
Channel Defaults
Cycle Time
Channel 1
Channel 2
Channel 3
Channel 4
Channel 5
Channel 6
Channel 7
Channel 8
Channel 9
Channel 10
Bold italic times are in Hours:Minutes. All other times are in
Minutes:Seconds. Alert time = 0 (feature turned off).
2
HM10
Menu 1
Alert
Time
Time
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
04:00
0:00:00
04:00
0:00:00
HM10
Menu 2
Alert
Time
Time
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
30:00
0:00:00
04:00
0:00:00
04:00
0:00:00
Cycle End
Label
DISC
DISC
DISC
DISC
DISC
DISC
DISC
DISC
DISC
DISC
Cycle End
Label
DISC
DISC
DISC
DISC
DISC
DISC
DISC
DISC
DISC
DISC
755-503revA
Advertisement
