Gigaset E630 User Manual page 46

SMS (text messages)
Activate send service centre:
Enter the number of the SMS service:
Save settings:
If you have agreed a flat fixed line network rate, the chargeable numbers with dialling
code 0900 are often blocked. If, in this case, a 0900 number is entered for the SMS
service centre, you will not be able to send text messages from your phone.If the
attempt to send fails, the SMS is saved in the incoming messages list and indicated as
failed.
SMS to PABXs
•
The Call Line Identification must be forwarded to the extension of the PABX (CLIP).
•
If necessary, the access code/outside line code must be prefixed to the number of the SMS
service centre (depending on your PABX). To test: Send an SMS to your own number, once
with the access code and once without.
•
If the SMS is sent without the extension number, it will not be possible for the recipient to
answer directly.
Activating/deactivating first ring muting
Every incoming SMS is indicated by a single ring. If such a "call" is answered, the SMS is lost. To
prevent this, mute the first ring for all external calls. In idle status:
¤
(e.g. 1) . . . then
Do not mute the first ringtone:
Mute the first ringtone (default setting):
46
¤
Active Send: . . . use
sent via the SMS service centre)
For the SMS service centres 2 to 4, the setting only applies to the next
SMS.
¤
SMS Service Centre Number
¤
Save
to select Yes or No (Yes = SMS messages are
. . . use
. . . the current setting flashes in the input field
¤
OK
¤
OK
to enter the number