Omron D6F-PH User Manual page 23

3. Reading the Upper and Lower byte of Compensated Flow Data Registers(D051h & D052h)
The first data after the initialization process is not the flow rate data. Disable this data.
I2C command: To read Compensated flow data register, it needs to set 2Ch (it
START Slave Address
S D8h (6Ch (7b)+ 0)
I2C command: Through Read Buffer 0(address:07h) and Read Buffer 1(address:08h),
START Slave Address
S D8h (6Ch (7b)+ 0)
D6F-PH MEMS Differential pressure Sensor User's Manual (A288)
means 2byte read) to interface configuration register (address:2h).
ACK Access Address
A 00h
Serial Ctrl
you can read the 2byte of Compensated flow data.
ACK Access Address
A 07h
Re-Start Slave Address
RS D9h (6Ch (7b)+ 1)
ACK Reg Address H
A D0h
ACK STOP
2Ch A P
ACK
A
ACK Read Data H
A xxh
ACK Reg Address L
A 51h
ACK Read Data L
A xxh
ACK
A
ACK STOP
NA P
22