Samsung Digimax GX-1S User Manual page 50

Using the Built-in Flash
INFORMATION
Switch between Auto discharge mode and Manual discharge mode (Flash ON) by pressing the
button while the built-in flash is popped up.
If Auto discharge is set,
3. Press the shutter release button fully. The picture is taken.
4. Push down on the portion indicated in the illustration to retract
the flash.
Using Manual Discharge (Flash ON)
1. Press the button.
The built-in flash pops up and begins charging.
Manual discharge mode (Flash ON) is used regardless of flash
mode settings. When the flash is fully charged,
the LCD panel and viewfinder.
INFORMATION
Switch between Auto discharge mode and Manual discharge
mode by pressing the
popped up when shooting mode is set to
, , , or
2. Press the shutter release button fully. The flash discharges and the picture is taken.
3. Push the flash down to retract.
appears on the LCD panel.
,
button while the built-in flash is
.
appears in
, , ,
49