Table of Contents
Advertisement
Y
O U R
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.7.
ΠVHF/UHF
´ WIRELESS HEADPHONES
ˇ SUPER VIDEO INPUT
¨ VIDEO INPUTS
ˆ AUDIO INPUTS
1.4
C
O
: Y
N
HAPTER
NE
OUR
N
T V
E W
Connect to an antenna or to a cable TV system.
Connect a pair of wireless headphones here
(optional)
S-Video signal from an S-VHS VCR or laserdisc
player.
Video signals from VCRs, laserdisc players and
similar devices (Two sets are available: Video1
and Video2).
Audio signals from VCRs, laserdisc players and
similar devices.
TV
EW
Ø AUDIO-VIDEO
MONITOR OUTPUTS
These audio-video signals are identical to
A/V signals being displayed on the big screen.
(Typically used as the input signals for a record-
ing VCR.)
Note: The monitor out does not operate in DVD
mode.
∏ DVD INPUT
Connect video from a DVD player.
" DVD AUDIO INPUT
Connect to the audio output jacks of a DVD play-
er.
Advertisement
Table of Contents
