Rear Panel Jacks - Samsung CL14A8 Owner's Instructions Manual

Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.8.
For models CL-14A8L/CL-15A8L/CL-15A8W/
CL-25K4W
For models CL-21A8W/CL-21A8L/CL-21A9W/
CT-21S8W
For models CL-25A6W/CL-25A6P/
CL-25M6W/CL-25M6P
1.4
C O : Y N
HAPTER NE OUR
N T V
E W
TV
EW
ΠVIDEO INPUT
Video signals from VCRs, DVD players and similar
devices.
´ AUDIO INPUTS
DVD AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
devices.
Use these jacks to connect the audio signals from a
DVD player when using the DVD video input jacks.
When not using the DVD jacks, these audio jacks
function as audio for Video 2 or S-VIDEO).
(For models CL-21A8W/CL-25A6W/CL-25A6P/
CL-21A8L/CL-21A9W/CL-21S8W/CL-25M6W/
CL-25M6P)
ˇ AUDIO-VIDEO MONITOR OUT-
PUTS
These audio-video signals are identical to A/V signals
being displayed on the big screen. (Typically used as
the input signals for a recording VCR.)
¨ SUPER VIDEO INPUT
(For models CL-25A6W/CL-25A6P/CL-25M6W/
CL-25M6P)
S-Video signal from an S-VHS VCR or DVD player.
ˆ DVD VIDEO INPUT
(For models CL-21A8W/CL-25A6W/CL-25A6P/
CL-21A8L/CL-21A9W/CL-21S8W/CL-25M6W/
CL-25M6P)
Connect video from a DVD player.
Note: Only black and white signals are output from a
monitor in DVD mode.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.
/
(INPUT1 and 2)
(INPUT 2)