Rear Panel Jacks - Samsung CL29A5 Owner's Instructions Manual

Y
O U R

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a laserdisc player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a laserdisc, 2 VCRs, etc.)
For more information on connecting equipment, see pages 2.1 – 2.8.
ΠVIDEO INPUT jack
´ AUDIO INPUTS
ˇ AUDIO-VIDEO MONITOR
1.4
C O : Y N
HAPTER NE OUR EW
N T V
E W
Video signals from VCRs, laserdisc
players and similar devices.
(INPUT1 and 2)
DVD AUDIO INPUTS
Audio signals from VCRs, laserdisc
players and similar devices.
Use these jacks to connect the audio signals
from a DVD player when using the DVD video
input jacks. When not using the DVD jacks, these
audio jacks function as audio for Video 2 or S-
VIDEO).
OUTPUT jacks
These audio-video signals are identical to A/V
signals being displayed on the big screen. (Typi-
cally used as the input signals for a recoding
VCR.)
TV
¨ SUPER VIDEO INPUT jack
(Except models CT-29K3W/
CT-29K5W)
S-Video signal from an S-VHS VCR or laserdisc
/
player.
(INPUT 2)
ˆ DVD VIDEO INPUT jacks
Connect video from a DVD player.
Note: Only black and white signals are output
from a monitor in DVD mode.
Ø VHF/UHF
Connect to an antenna or to a cable TV system.