Viewing An External Signal Source - Samsung SP43T9 Owner's Instructions Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from
connected equipment, such as VCR, DVD, Set-Top Box and the TV
source (broadcast or cable)
1
Press the MENU (
Result: The options available in the Input group are
displayed.
2
Press the ENTER (
Result: The Source List is selected.
3
Press the ENTER (
Press the ▲ or ▼ button to select signal source, then press the
4
ENTER ( ) button.
➢
◆ When you connect equipment to the TV, you can choose
between the following sets of jacks : Ext., AV1, AV2,
Component1 or Component2 on the TV's rear panel, and
AV3 or S-Video on the TV's side panel.
◆ You can select these options simply by pressing the
SOURCE (
5
Press the MENU (
Result: The options available in the Input group are
displayed again.
Press the ▲ or ▼ button until the Edit Name is selected.
6
Press the ENTER (
Press the ▲ or ▼ button to select the external source to be edited.
7
Press the ENTER (
Result: The device names available are listed.
VCR - DVD - Cable STB - HD STB -
Satellite STB - AV Receiver - DVD Receiver -
Game - Camcorder - DVD Combo -
DHR (DVD HDD Recorder) - PC.
Select the required device by pressing the ▲ or ▼ button.
8
Press the ENTER (
➢
If you change the external source while viewing, pictures
might take a short period of time to be switched.
) button.
) button.
) button again.
) button.
) button.
) button.
) button.
) button to confirm.
TV Input
Source List : TV
Edit Name
Move Enter
TV Source List
TV
Ext. : - - - -
AV1 : - - - -
AV2 : - - - -
AV3 : - - - -
S-Video : - - - -
▼ More
Move Enter
Input
TV
Source List : TV
Edit Name
Move Enter
TV Edit Name
Ext. : - - - -
- - - -
AV1 : - - - -
VCR
AV2 : - - - -
DVD
AV3 : - - - -
Cable STB
S-Video : - - - -
HD STB
Component1 : - - - -
Satellite STB
▼ More
†
Move Enter
English - 51
√ √
√ √
Return
Return
√ √
√ √
Return
√ √
√ √
√ √
√ √
√ √
√ √
Return