Connecting A Vcr - Samsung SlimFit TX R2779H Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna
or a cable TV system (according to the instructions on pages 14~17).
Please be sure to match the color coded input terminals and cable jacks.
•
1
Connect a coaxial cable between the
"ANT 1 IN (Air)" terminal on the TV and
the antenna out terminal on the VCR.
A coaxial cable is usually included with
a VCR. (If not, check your local
electronics store).
2
Connect a set of audio cables between
the "AV IN 1 (L, R)" (or "AV IN 2/3 (L,
R)") jacks on the TV and AUDIO OUT
jacks on the VCR.
If you have a mono VCR, connect
L(mono) to VCR audio out using only
one audio cable.
3
Connect a video or S-video cable
between the "AV IN 1 (VIDEO)" ("AV IN
2/3 (VIDEO)" or "S-VIDEO IN 1") jack on
the TV and the VIDEO OUT jack on the
VCR.
Refer to your VCR' s instructions for
more information about how to view
your VCR tape.
• Also, you can connect to "AV IN 4" on the side panel of TV.
TV Rear Panel
2
English - 18
1
3