Storing Channels In Memory - Samsung SlimFit TX R2779H Owner's Instructions Manual

O
P E R AT I O N
4
Press the ▲ or ▼ button
to select the antenna
connection, then press the
ENTER button.
When selecting Cable TV system:
Press the ▲ or ▼ button
to select "Cable", then
press the ENTER button.
Press the ▲ or ▼ button
to select "STD", "HRC", or
"IRC", then press the
ENTER button.

Storing Channels in Memory

5
Press the ▲ or ▼
button to select the
antennas to memorize.
Press the ENTER button
to select "Start".
6
Press the ENTER button to
start the auto program.
The TV begins memorizing
all available channels.
Press the ENTER button at
any time to interrupt the
memorization process.
Press the EXIT button to exit.
• All available DTV and analog channels are automatically stored
in memory when channels are selected by the direct tuning
function.
T V Auto Program
Select the antennas to memorize
Air
Cable
Air + Cable
T V Auto Program
Select the antennas to memorize
Air
Cable
Air + Cable
T V Auto Program
Select the cable system
STD
HRC
IRC
T V Auto Program
Select the antennas to memorize
Air
Cable
Air + Cable
Auto Program
Channel Memory in Process
Air Channel 15
Stop
English - 31
œ Air
Cable
Start
Start
Start
Air+Cable: "Air" and "Cable"
Start
Start
Start
œ
STD, HRC, and IRC
identify various types of
cable TV systems. Contact
your local cable company
to identify the type of cable
system that exists in your
particular area.
Start
Start
Start
œ The TV must be connected
to an antenna in order to
receive digital TV signals.
Even if a particular channel
is deleted from the memory,
you can always tune to that
channel directly by using
the number buttons on the
remote control.
: "Air" antenna
signal
: "Cable" antenna
signal
antenna signals