Viewing An External Signal Source; Setting The Signal Source - Samsung SlimFit TX R2779H Owner's Instructions Manual

O
P E R AT I O N

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).

Setting the Signal Source

1
Press the MENU button.
Press the ENTER button to
select "Input".
2
Press the ENTER button to
select "Source List".
Press the ▲ or ▼ button to
select the signal source,
then press the ENTER
button
Alternate method:
Press the SOURCE or
TV/COMP. button on the
remote control repeatedly to
select an external signal
source.
Input
T V
Source List
Edit Name
T V
Source List
TV
Video1 : - - - -
Video2 : - - - -
Video3 : - - - -
Video4 : - - - -
S-Video1 : - - - -
More
▼
Video3
English - 44
√
√
œ When you connect
equipment to the TV, you
can choose between the
following sets of jacks :
Video1, Video2, Video3,
S-Video1, Component1,
Component2, or HDMI
on the TV' s rear panel,
and Video4 or S-Video2
on the TV' s side panel.
œ SOURCE button :
TV → Video1 → Video2
→ Video3 → Video4 →
S-Video1 → S-Video2
TV/COMP. button :
TV → Component1 →
Component2 → HDMI