Cisco MDS 9148T Hardware Installation Manual page 38

Installing the Cisco MDS 9148T Switch
Installing the Switch into a 2-Post Rack
Figure 12: Installing the Switch onto the 2-Post Rack From the Front Side of the Chassis
Figure 13: Installing the Switch onto the 2-Post Rack From the Rear Side of the Chassis
3. Tighten the 10-32 screws to 20 in-lb (2.26 N.m) or tighten the 12-24 screws to 30 in-lb (3.39 N.m).
Cisco MDS 9148T 32-Gbps 48-Port Fibre Channel Switch Hardware Installation Guide
32