Meridian M3902 Description And Installation page 168

M3900 series digital telephones
Hide thumbs Also See for M3902:
Table of Contents

Advertisement

Page 168 of 174
FRCE
(NO)
YES
FVER
v
LD 32 – Flash Download commands.
Prompt
Response
.
FDLU l s c u
.
FDLI l s c u
.
FDLF l s c u
.
FWVU l s c u
553-3001-216 Standard
Appendix A: Flash Download procedure
System-wide Flash Download control option.
Conditional (default).
System-wide Flash Download (using the FDLS command in
LD 32) applies only to an M3900 series set whose flash
firmware version is different is different from the version
currently found on the system disk.
Forced.
Force System-wide Flash Download to all of the specified
M3900 series sets regardless of their current flash firmware
versions.
Note 1: Use this option with caution. Once the download tree is
built (that is, after executing FDLS in LD 32), this option
automatically reverts to NO.
Note 2: This option is not applicable to reporting.
Flash firmware version specified for full report, where:
v = Flash firmware version (0-99)
If 0, report all versions (default).
Note: This option is applicable to reporting only (through the
FSUM ALL command in LD 32).
Description
Initiate conditional download to one telephone.
Terminal number, where:
l = loop address
s = shelf address
c = card address
u = unit address
Initiate conditional download to an M3900 Series telephone
when it becomes idle.
Initiate a forced download to an M3900 Series telephone
regardless of its version and state.
Query and print the firmware versions currently on an
M3900 Series telephone.
5.00
January 2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

M3901M3903M3904M3905

Table of Contents