Advertisement
Quick Links
M3901 Quick Reference Guide
The M3901 entry telephone features are presented below. Information on how to
use the features begins on page two.
M3901 features
•
One Line Key (Main Directory Number (DN))
•
Five Programmable Features
•
Four Fixed Keys:
— Hold
/
Hold
— Goodbye
Goodbye
•
Volume Control Bar
•
LED Indicators (Message and Call Status Indicator/Feature Activation
Indicator)
•
Feature Card:
The M3901 supports five programmable features. The Feature Card lists
the five features or Auto Dial numbers assigned to your telephone. The
Feature Card lists the dial pad number key assigned to each feature. This
card is attached to your telephone.
Feature
Message
Activation
Waiting
Indicator
Indicator
To use Auto Dial,
press Feature key,
then corresponding
numeric key on dial pad.
Auto Dial Number
1
2
3
4
5
(
)
Issue 1.00
— Line
— Features
/
Feature Activation Indicator
P0903805
Main Directory Number (DN)
/
Line
/
Fx
Feature
Feature
Goodbye
Line
Volume Control Bar
Hold
Message and Call
Status Indicator
Feature Card
553-8966
1
Advertisement
Related Manuals for Meridian M3901
Summary of Contents for Meridian M3901
- Page 1 M3901 Quick Reference Guide The M3901 entry telephone features are presented below. Information on how to use the features begins on page two. M3901 features • One Line Key (Main Directory Number (DN)) • Five Programmable Features • Four Fixed Keys: —...
- Page 2 M3901 Quick Reference Guide Fixed Keys Line Key: The (DN) Key is used for incoming and outgoing calls. Lift Line the handset to answer calls or to make an outgoing call. Feature Key: To use a feature, press the Key followed by a dial pad Feature number key to activate a feature.
- Page 3 M3901 Quick Reference Guide Status of Message and Call Status Indicator LED On (steady light) A message is waiting Wink (slow flash) An incoming call is ringing Flash A call is on hold No message waiting, no call on hold, and...
- Page 4 Key followed by the dial pad number key assigned on the Feature Feature Card for Call Transfer. Replace the handset to transfer the call. Note: On the Meridian SL-100, if you press the Key followed by Feature the dial pad number key assigned on the Feature Card for the Call Transfer fea- ture again, you join the two parties.