Samsung SyncMaster 400CX-2 Quick Start Manual page 26

2. Insert the CAM with the CI CARD installed into the common interface slot.
(Insert the CAM in the direction of the arrow, right up to the end so that it is parallel
with the slot.)
3. Check if you can see a picture on a scrambled signal channel.
Connecting AV Devices
1. Connect the Video and [R-AUDIO-L] port of the DVD, VCR or DTV Set-Top Box
to the Video and [R-AUDIO-L] port of the LCD Display.
2. Play the DVD, VCR or Camcorder with a DVD disc or tape inserted.
3. Select AV using the SOURCE .
Connecting using a Component Cable
1. Connect a set of audio cables between the AV/COMPONENT AUDIO IN [R-AUDIO-
L] on the LCD Display and the AUDIO OUT jacks on the DVD player or other external
device.
2. Connect the Component to D-sub cable(sold separately) to the product's RGB/
COMPONENT IN port and the DVD player's COMPONENT - PR, Y, PB ports.
Note
" Select Component using the SOURCE button on the front of the LCD Display or on
the remote control.
" Then, start the DVD Player with a DVD disc inserted.
" A component cable is optional.
Connections
33