Kidde HART XL User Manual page 26

LaserNET™ Program User's Guide
3-5 ENTERING AND CHANGING PASSWORDS
3-5.1 Access Levels
Three levels of access are available:
Access Level
Monitoring
Owner Level
Installer Level
Note: Passwords are not case sensitive.
A limited number of monitoring functions are available without entering a password. The installer-level
password gives access to all functions. The owner-level password gives access to the following functions:
• Smoke History Download
• Event History Download
• View Max/Min Levels
• Print Configuration
• Time and Date
3-5.2 Entering the Password
To enter the password:
1. First, connect to the system by selecting Connect from the main menu. The system will default to be
configured for a Direct Connection. See Chapter 3 if the system needs to be configured for a connection
other than Direct Connection. The Display and Control Window (see Figure 5-1) will appear if a connec-
tion is made. If a connection is not made, a notification message will appear. Recheck hardware and
system configuration and repeat step one.
2. From the main menu select Password>Enter Password. The Logon window displays, as shown in
Figure 3-6.
3. Enter the password.
4. Select <OK>.
3-5.3 Changing the Password
Passwords should be changed from the factory default values to prevent unauthorized access.
1. Select Password>Change Owner Pwd or Password>Change Installer Pwd. The appropriate screen
will appear. See Figure 3-7 for an Owner Password screen example.
TM0048
Password
No password required (not available for Remote
IIM connection)
Up to 8 characters, default = own
Up to 8 characters, default = inst
Figure 3-6. Logon Window
3-4 September 2003