Kidde HART XL User Manual page 16

LaserNET™ Program User's Guide
5. Choose Destination Location screen (Figure 1-6). Setup will automatically default to place the file in the
C: drive. To choose another location to place the file, click on the <Browse> button. The Choose Folder
screen will appear (Figure 1-7) to allow the user to place the program in a specified location. Click on
the <OK> button after choosing a new folder to return to the Choose Destination Location Screen. After
the destination for LaserNET has been chosen, click on the <Next> button to proceed to the next
screen. Click on the <Back> button to go to the previous screen at any time. Click on the <Cancel>
button at any time to end the InstallShield
6. Select Program Folder (Figure 1-8). The system will automatically default to create a new folder for
LaserNET (Figure 1-8). To choose another folder, scroll down the list and click on the folder in which
LaserNET should be placed, or type in a new folder name. Click the <Next> button to start the installa-
tion process.
TM0048
Wizard.
®
Figure 1-6. Choose Destination Location Screen
Figure 1-7. Choose Folder Screen
1-4 September 2003