Advertisement
To edit a Remote IIM listing:
1. Highlight the entry and click on <Edit> (see refer to Figure 3-2). The Edit Directory Item Window (Figure
3-4) displays where changes can be made. Select <OK> to save the changes.
Note: If connection difficulties are encountered when dialling into a Remote IIM, try editing the phone
number. It may be necessary to insert additional commas between segments of the number to
avoid timing problems. For example, a comma (indicating a pause of a few seconds) should always
be inserted between the number required to get an outside line and the rest of the telephone number.
If the Remote IIM is accessible via an extension off a PBX, four or more commas may have to be
inserted between the primary phone number and the extension to allow the remote PBX time to
connect. Because different PBX systems respond at different speeds, the number of commas
needed must be found by experiment.
3-4
LAUNCHING LASERNET
1. Select Start>Programs>LaserNET 3>LaserNET 3 or double-click on the LaserNET icon on the desk-
top.
The main screen displays as shown in Figure 3-5.
Note: When menu selections are greyed out, they are not available due to password access level, hard-
ware configuration or communication has not been established with a Detector.
September 2003
Figure 3-4. Edit Directory Item Window
Figure 3-5. LaserNET Main Screen
3-3
LaserNET™ Program User's Guide
TM0048
- Quick Links:
- Introduction
Hide quick links:
Advertisement
