Color Temp; Digital Nr (Digital Noise Reduction) - Samsung SyncMaster P50FN User Manual

Color Temp.

MENU → → ENTER → [Picture] → → → → ENTER → [Color Temp.] → , → ENTER
Color temp is a measure of the 'warmth' of the image colors.
Note
This function is only enabled if the Color Tone is set to Off.
Size
MENU →
The Size can be switched.
1. 16:9 - Sets the picture to 16:9 wide mode.
2. Zoom 1 - Magnifies the size of the picture on the screen.
3. Zoom 2 - Magnifies the size of the picture more than "Zoom 1".
4. 4:3 - Sets the picture to 4:3 normal mode.
5. Just Scan - Displays the input scenes as they are without any cutoff when HDMI 720p,
1080i, 1080p signals are input.
Note
Certain external devices may feed the display an out of spec signal that may cause cutoff
even when using the Just Scan feature.
ZOOM1, ZOOM2 will be unavailabel in HDMI mode.
Note
The Position and Reset functions are available when Zoom1 or Zoom2 is run.

Digital NR (Digital Noise Reduction)

MENU →
→ ENTER
Adjusting the PDP Display
→ ENTER → [Picture] →
→ ENTER → [Picture] →
→ → ENTER → [Size] →
→ →
→ → → ENTER → [Digital NR] →
→ →
→ ENTER
,
,