Wall Bracket Installation; Wall Bracket Assembly - Samsung SyncMaster P50FN User Manual
Pdp monitor
Hide thumbs
Also See for SyncMaster P50FN:
- Quick start manual (2 pages) ,
- Quick start manual (35 pages) ,
- Control protocol (90 pages)
Table of Contents
Advertisement
Notice
For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12
mm length.
Wall Bracket Installation
•
Contact a technician for installing the wall bracket.
•
SAMSUNG Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
•
This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
Wall Bracket(1)
Wall Bracket Assembly
Note
There are two hinges(left and right). Use the correct one.
1.
Insert and tighten the Captive Screw in the direction of the arrow.
When done, mount the wall bracket on the wall.
There are two hinges(left and right). Use the correct one.
Introduction
Hinge(Left 1, Right
Plastic
1)
Hanger
(4)
Screw
Screw
Anchor
(A)(11)
(B)(4)
(11)
Advertisement
Table of Contents
Troubleshooting
