Preset Timing Modes - Samsung SyncMaster P50FN User Manual

Recommended
PowerSaver
This PDP Display has a built-in power management system called PowerSaver. This system
saves energy by switching your PDP Display to low-power mode when it has not been used
for a certain amount of time. The PDP Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your PDP Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver (When used as a Network PDP Display)
Power Indicator
Power Consump-
tion
PowerSaver (When used as a normal PDP Display)
Power Indicator
Power Consump-
tion

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while the power LED is on. Refer to the video card manual and adjusts the screen as
follows.
Display Mode
IBM, 640 x 350
IBM, 640 x 480
IBM, 720 x 400
MAC, 640 x 480
MAC, 832 x 624
MAC, 1152 x 870
Specifications
CPU
P3.0 GHz 512 M
State Normal Opera-
P50F(N)
P63F(N)
State Normal Opera-
P50F(N)
P63F(N)
Horizontal
Frequency
(kHz)
31.469
31.469
31.469
35.000
49.726
68.681
RAM Ethernet OS
100 M / 1 Windows
G XP
Power saving
tion mode
Green Green, Blink-
ing
550 W Less than5
watts
750 W
Power saving
tion mode
Green Green, Blink-
ing
550 W Less than2
watts
750 W
Vertical Fre- Pixel Clock
quency (Hz) (MHz)
70.086 25.175
59.940 25.175
70.087 28.322
66.667 30.240
74.551 57.284
75.062 100.000
Application
WMP 9 or
later
Power off
EPA/ENERGY
2000
Red
Less than5
watts
Power off
EPA/ENERGY
2000
Red
Less than2
watts
Sync Polarity
(H/V)
+/-
-/-
-/+
-/-
-/-
-/-