Samsung SyncMaster 940MW User Manual page 36

Area When you turn the power on of the product for the first time since it released
Configuration from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Setup-Area Configuration.
Language You can choose one of 8 languages.
Sleep Timer Turns the monitor off after a pre-determined period of time.
Off, 30, 60, 90, 120, 150, 180
Transparency Change the opaqueness of the background of the OSD.
High
Medium
Low
Opaque
Blue Screen If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to continue
viewing the poor picture, you must set the "Blue screen" mode to "Off".
On / Off
Reset Picture parameters are replaced with the factory default values.
- Available in PC Mode Only
Image Reset
: Image parameters are replaced with the factory default values.
Colour Reset
: Color parameters are replaced with the factory default values.
This product can be used worldwide if area configuration is set
up regardless of broadcasting type.
If country is not selected properly, the product may not locate
channels.
The selected language is only applied in the Monitor Screen
Settings menu.
It has no effect on any software running on the computer.
Image Reset
Colour Reset