Connecting The Monitor; Connecting To A Computer; Connecting To A Macintosh - Samsung SyncMaster 940MW User Manual

Connecting the monitor

1.Connecting to a Computer

Connect the power cord for your monitor to the POWER on the back of the monitor.
1.
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the RGB port on the back of your monitor.
Using the DVI (Digital) connector on the video card.
2-2.
Connect the DVI cable to the DVI(HDCP) port on the back of your monitor.
Connect the (DVI/PC IN) AUDIO port on the rear side of the monitor to the sound card of the PC.
3.
Turn on both your computer and the monitor.
4.

2. Connecting to a Macintosh