Sams Wiring With Relays Not Energized; Dual Gate Settings - Chamberlain CSL24UL Installation Manual

SAMS wiring with relays not energized

Dual Gate Settings

NOTE: We recommend that all accessories and board configurations are set on the primary operator.
Main control board
FEATURE PRIMARY OPERATOR
Timer-to- Set the TTC dial to desired
Close setting
Bi-Part Bi-Part Delay: ON (will open
Delay last and close first)
Switch
Tandem Mode: OFF
Synchronized Close: ON
Expansion board
FEATURE PRIMARY OPERATOR
QUICK CLOSE Switch ON
ANTI-TAIL Switch ON
LOW BATT Switch Battery Fail OPEN:
OPEN
Battery Fail CLOSE:
CLOSE
AC FAIL OPEN/BATT OPEN
Switch
APPENDIX
SECONDARY OPERATOR
OFF
Bi-Part Delay: OFF (will open
first and close last)
Tandem Mode: OFF
Synchronized Close: ON
SECONDARY
OPERATOR
OFF
OFF
Battery Fail OPEN:
OPEN
Battery Fail CLOSE:
CLOSE
OPEN
Accessories
ACCESSORY PRIMARY OPERATOR
Remote Controls Program remote
controls 1 to 50 to the
primary operator.
LiftMaster Internet Program to primary
Gateway operator.
Garage and Gate Program to primary
Monitor operator.
48
SECONDARY
OPERATOR
Program remote
controls 51 to 100 to the
secondary operator