Table of Contents
Advertisement
Note:
Although dialing a number using the numeric keys can only
be done by activating the phone side, you can use the Voice
Services feature via the Main LCD to verbally dial a number
from your contacts list (page 166).
Dialing Options
After entering numbers within standby mode, select Options
(
) to see the following dialing options:
To initiate an option, highlight it and press
(1) Dial: Allows you to dial the number.
(2) Save: Enter a seven- or ten-digit
number (area code and phone
number) and press Options (
Save to save the phone number
in your Contacts.
(See "Saving a Phone Number" on
page 58.)
(3) Find: Enter a digit or string of digits and press Options
(right softkey). Select Find to display Contacts entries that
contain the entered numbers. (See "Finding a Phone
Number" on page 60.)
(4) Hard Pause allows you to enter a hard pause (the phone
waits for user input). To continue dialing, you must press
a key. (See "Dialing and Saving Phone Numbers With
Pauses" on page 61.)
(5) 2sec Pause allows you to enter a two-second pause. The
phone will pause, then continue dialing without any
additional keys being pressed. (See "Dialing and Saving
Phone Numbers With Pauses" on page 61.)
52
MENU
OK
.
MENU
OK
) >
Section 2A: Phone Basics
Advertisement
Table of Contents
