Table of Contents
Advertisement
Using Call <Name or #>
You can voice dial from your phone with a single command by
saying "Call" followed by a name or nickname (see "Calling
Nicknames" on page 168) and (optionally) a label stored in
your Contacts list; or say "Call" followed by a valid phone
number. You can also say "Call" by itself and be prompted for
the name or number.
Calling Contacts Entries
To place a call using Call <Name or #>:
1.
Press and hold
2.
Say "Call" followed by the name
and the label for the number you
wish to call. For example, say "Call
John Mobile." The phone dials the
number stored for the contact
"John" with the label "Mobile."
If the location recognized for the name
does not have a number stored in Contacts, your phone will
play the message "No number available, John Smith, Mobile,"
and then launch the Contacts application for that name.
If a name has only a single number, or if you know the name
but are not sure which number to call, say "Call" followed by
the name only. For example, say "Call John." If the name is
recognized and there is only one number for the name, your
phone immediately places the call. If there are multiple
numbers stored for the contact, the phone prompts you with
"Which Number?" and displays a list of options. You can select
an option by saying it or by using your keypad.
Section 2H: Using Your Phone's Voice Services
MENU
OK
.
167
Advertisement
Table of Contents
