Table of Contents
Advertisement
Using Your Phone's Battery and Charger
Battery Capacity
Your Sprint PCS Vision Phone is equipped with a Lithium Ion
(Li-Ion) battery. It allows you to recharge your battery before it is
fully drained. It provides up to 3 hours of continuous digital talk
time (up to 1.6 hours in analog) or up to 8 days of continuous digital
standby time (up to 16 hours in analog).
When the battery reaches 5% of its capacity, the battery icon blinks.
When there are approximately two minutes of talk time left, the
phone sounds an audible alert and then powers down.
Note:
Long backlight settings, searching for service, vibrate mode, and
browser use affect the battery's talk and standby times.
Tip:
Be sure to watch your phone's battery level indicator and charge the
battery before it runs out of power.
Installing the Battery
To install the Li-Ion battery:
1.
Insert the battery into the opening on the back of the phone at
an angle, making sure the plastic tab on the bottom of the
battery is inserted into the matching slot in the phone.
2.
Press down until the battery snaps into place.
Section 2A: Your PCS Vision Phone - The Basics
19
Advertisement
Table of Contents
