Answering Calls - Samsung SPH PM-A740 Owner's Manual

You can also place calls from your Sprint PCS Phone by using
Sprint PCS Voice Command
from your Contacts (page 29), and using your Call History listings
(page 81).
Tip: To speed dial a phone number from standby mode, press and hold the
speed dial number. If the speed dial number is two digits, enter the first
digit, then press and hold the second digit. (For information on setting up
speed dial numbers, see "Assigning Speed Dial Numbers" on page 88.)
(This feature will not work when you are roaming off the Sprint
NationwidePCS Network; when roaming you must dial using eleven
digits [1 + the area code + the seven-digit phone number.])

Answering Calls

To answer an incoming call:
1.
Make sure your phone is on. (If your phone is off, incoming
calls go to voicemail.)
2.
Press
phone's settings, you may also answer incoming calls by
opening the phone or by pressing any number key. See "Call
Answer Mode" on page 48 for more information.)
Your Sprint PCS Vision Phone notifies you of incoming calls in the
following ways:
The phone rings or vibrates (unless set to Silence All).
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If the incoming call is from a number stored in contacts, the entry
name is displayed. The caller's phone number may also be displayed,
if available.
The following options are also available:
Press
Press and hold the volume key to send the incoming call to your
voicemail box.
Section 2A: Your PCS Vision Phone - The Basics
SM
to answer an incoming call. (Depending on your
to quiet the ringer.
(page 159), Speed Dialing numbers
23