Using Your Phone's Battery And Charger - Samsung SPH-a640 Series User Manual

Portable tri-mode telephone
Hide thumbs Also See for SPH-a640 Series:
Table of Contents

Advertisement

If your phone is unable to find a signal after 15 minutes of searching,
a Power Save feature is automatically activated. When a signal is
found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically
without your intervention. You can also initiate a search for service by
pressing any key (when your phone is turned On).
Tip:
The Power Save feature helps to conserve your battery power when
you are in an area where there is no signal.
To turn your phone off, press and hold
until you see the powering down animation on the display
screen.
Your screen remains blank while your phone is off (unless the battery
is charging).

Using Your Phone's Battery and Charger

Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows
you to recharge your battery before it is fully drained. The battery
provides approximately 3 hours of continuous digital talk time or
approximately 8 days of continuous digital standby time.
When the battery reaches 5% of its capacity, the battery icon blinks.
When there are approximately two minutes of talk time left, the
phone sounds an audible alert and then powers down.
Note:
Long backlight settings, searching for service, vibrate mode,
playing games, or browser use affect the battery's talk and standby
times.
11 Getting Started
for two seconds

Advertisement

Table of Contents
loading

Table of Contents