Turning Your Phone On And Off; Using Your Phone's Battery And Charger - Samsung SCH-r610 User Manual

Hide thumbs Also See for SCH-r610:
Table of Contents

Advertisement

4. Use the navigation keys to scroll through the list of icons.

Turning Your Phone On and Off

To turn your phone on:
Press and hold
Once your phone is On, it displays "Looking for Service" indicating that your phone
is searching for a signal. When your phone finds a signal, it automatically enters
standby mode – the phone's idle state. At this point, you are ready to begin making
and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. When a signal is found, your phone automatically
returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your
intervention. You can also initiate a search for service by pressing any key (when
your phone is turned On).
Tip: The Power Save feature helps to conserve your battery power when you are in
an area where there is no signal.
To turn your phone off:
Press
animation on the display screen.
Your screen remains blank while your phone is Off (unless the battery is charging).

Using Your Phone's Battery and Charger

Battery Capacity
Your phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge
your battery before it is fully drained.
When the battery runs low, the battery icon will blink to remind you to recharge the
battery. When the battery capacity is close to completely drained, the phone
sounds an audible alert and powers down.
6 Getting Started
to turn your phone on.
for two or more seconds until you see the powering down

Advertisement

Table of Contents
loading

Table of Contents