Extron electronics HAI 100 4K Setup Instruction Manual

HAI 100 4K • Setup Guide
The Extron HAI 100 4K is an audio embedder that embeds either two-channel analog audio, or two-channel or multi-channel
S/PDIF digital audio onto the HDMI output signal. The HAI 100 4K includes an HDMI input, analog stereo audio and S/PDIF audio
inputs, as well as an HDMI output.
Mounting
The HAI 100 4K can be placed on a desktop or tabletop using the included rubber feet, or mounted to a rack or furniture (see the
HAI 100 4K User Guide, available at www.extron.com, for mounting options and instructions).
Cabling

Rear Panel Features and Cabling

POWER
12V
0.4A MAX
K
INPUT
A A B B
HAI 100 4K Rear Panel
Figure 1.
A Power input — Connect the provided power supply to the 3.5 mm, 2-pole captive
screw power receptacle (see the image at right).
ATTENTION:
• Do not connect the power supply before reading the Attention in the
Power Supply section of the HAI 100 4K User Guide.
• Ne branchez pas la source d'alimentation externes avant d'avoir lu
les mises en garde dans la section « Power Supply » du HAI 100 4K
User Guide.
B
HDMI input — Connect an HDMI input source into this female HDMI type A
connector.
NOTE: By default, the EDID stored at the HDMI input is set to 720p at 60 Hz with 2-channel audio. EDID can be
configured using Extron PCS software or SIS commands (see
C HDMI output — Connect an HDMI output device into this female HDMI type A connector.
D Analog audio input — Connect an analog audio device to this 5-pole 3.5 mm captive screw connector (see figure 2). This
connector accepts 2-channel stereo balanced or unbalanced audio.
NOTE: Analog audio is embedded automatically by default, replacing any existing embedded digital audio.
input audio format setting can be configured
Do not tin the wires!
Analog Input Connector Wiring
Figure 2.
ATTENTION:
• Connect the sleeve to the ground (Gnd) terminal. Connecting the sleeve to a negative (-) terminal will damage the
audio output circuits.
• Connectez le manchon à la terminaison terre (Gnd). Connecter le manchon à une terminaison négative (-)
endommagera les circuits de la sortie audio.
ANALOG S/PDIF HAI 100 4K
L R
OUTPUT AUDIO INPUTS
C C D D E E
Tip
Ring
Sleeves
Tip
Ring
Balanced Audio Input
A D
Power input Analog audio input
B HDMI input E S/PDIF audio input (see the next page)
C
HDMI output
Configuration
using PCS or SIS commands (see
No Ground Here
Tip
Sleeves
Tip
No Ground Here
Unbalanced Audio Input
3/16"
(5 mm) Max.
Smooth
Ridges
A A
Captive Screw
Connector
SECTION A–A
Power Supply
Output Cord
on the next page).
Configuration on the next page).
The