Table of Contents
Advertisement
6A
is flashing.
Ignition lock-out (flame not detected) (pump is running)
Control Step
13.
Cable harness is damaged.
14.
Electronic card is defect.
GB012 - 25K
Action
B Switch off the appliance.
B Cut mains supply.
B Change the cable harness.
B Connect to main supply.
B Switch on the appliance.
B Press RESET button and restart again.
6A failure still exist ? -->14.
B Switch off the appliance.
B Cut mains supply.
B Change the electronic card.
B Connect to main supply.
B Switch on the appliance. END.
Failures / Errors
3
13
Hide quick links:
Advertisement
Table of Contents
