Table of Contents
Advertisement
You can also define advanced settings for
Access points: press <Options> →
Advanced settings.
• Network type - set a network type
(IPv6 or IPv4)
• Phone IP address (IPv4 only) - set
the IP address of your device
• DNS address (IPv4) - set primary and
secondary domain name server (DNS)
addresses or set to 0.0.0.0 for
automatic detection
• DNS address (IPv6) - set primary and
secondary domain name server (DNS)
addresses or set to Automatic (use
automatic detection) or Well-known
(use well-known IPv6 addresses)
• Proxy server address - set the IP
address of the proxy server
• Proxy port number - set the port
number of the proxy server
Packet data
Control packet data connections when
using a GPRS network.
• Packet data connection - set to open
a packet data connection, When
needed (if an application needs to
send packet data) or When available
(anytime a packet data connection on
a GPRS network becomes available)
• Access point - set an access point
name to send packet data to a
computer (see PC Studio help)
• High speed packet access - set the
device to use a high-speed packet
access connection
Settings
93
Advertisement
Table of Contents
