Parts Supplied - Raymarine ST40 Depth Instrument Owner's Handbook Manual

vi

Parts supplied

ST40
ST40 Depth instrument
Gasket
Clamping bracket
ST40
Depth
Instrument
Owner's
Handbook
Owner's Handbook.
Warranty document and fitting
templates included in Handbook
Note:
The items shown here are supplied for an ST40 Depth system. If an instrument is purchased separately, a transducer
is not included. If any item is not present, contact your Raymarine Dealer.
DEPTH
Worldwide
Distributors
Worldwide Service Centre
Handbook.
ST40 Depth Instrument Owner's Handbook
Instrument Cover
1 m (3 ft) power cable
Fixing
stud
Depth transducer
Supplied with bung
(not illustrated)
ST40 Depth Instrument - quick reference guide
SWITCH ON
Depth
Minimum
depth
Alarm on/off
3 seconds
Shallow
alarm
Alarm on/off
3 seconds
Deep
alarm
Alarm on/off
3 seconds
Shallow
anchor
alarm
Alarm on/off
3 seconds
Deep
anchor
alarm
Offset
Adjusting display backlighting/contrast
To enter adjust mode, press for 1 second to adjust BACKLIGHTING and a further 1 second to adjust CONTRAST
OFF LEVEL 1
To exit adjust mode press
Quick Reference Guide
Thumb
nut
Normal operation
+
With Set alarm level screen displayed,
Set press the
alarm
level and keys simultaneously
- to save the alarm level and return to
normal operation.
Notes:
* denotes temporary screens which will
time-out to the previous permanent
screen after 5 seconds.
On repeater instruments, only the
Depth and Minimum depth
screens are available.
LEVEL 2 LEVEL 3 LEVEL 2 LEVEL 1
or or wait for 5 second timeout
D4665-2