Section 17: Tools
Tools
Tools (such as camera, camcorder, calendar, and alarms) are
feature options that allow you to use your handset for a variety of
non-phone related activities. To access any of the tools, perform
the following:
Touch
Tools.
➔
Camera
For more information, refer to "Camera" on page 72.
Voice Recognition
Nuance Voice Recognition software is an advanced speech
recognition software used to activate a wide variety of functions on
your phone. Nuance software automatically voice activates (up to
2,000 contacts) for voice dialing and searching. No pre-recording
or training needed. Speak a contact name naturally to dial, and
use your voice to look up contacts, launch applications and
navigate phone menus.
Touch
Tools
➔
1.
At the voice prompt, say a command. The list of available
2.
commands is listed below.
95
Voice Recognition.
➔
Note: This list of voice commands is briefly displayed.
Say a Command Options
Call <Name or #>: dials a name or number listed in your contact list. If
•
multiple numbers exist (i.e. home, work, or other) say the name and the
number type (location).
Send Message to <Name or #>: displays the Create Text Message
•
screen.
Lookup <Name>: allows you use a voice command to locate and
•
display contact information stored in the Contacts list.
Go to <Application>: accesses all the features of your phone if they are
•
activated, such as: Voicemail, Contacts, Tones, Calendar, Tasks, and
Browser.
Check <Item>: lets you check your phone's status in the same report
•
(Status, Messages, Missed Calls, Time, Signal Strength, Network,
Battery, My Phone Number, and Volume).
While the Say a Command screen displays you have two options:
Tutorial: provides examples of how to use the voice commands.
•
Settings: lists the settings for voice command software such as:
•
Confirmation, Adaptation, Mode, Speakerphone, and About.