Motion Detection - Samsung SGH-a885 Series User Manual

Touch to return to Phone settings page.
4.
Vibration Feedback
You can set the level of vibration intensity that occurs when you
touch the screen.
From Idle mode, touch
1.
Vibration Feedback.
Drag the Vibration Intensity slider to the intensity level you
2.
desire (range is 0-4).
Touch Save.
3.
Calibration
The Calibration feature allows you to re-align the screen's touch
accuracy. Use this feature only when the device does not respond
properly when you touch the screen.
From Idle mode, touch
1.
Calibration.
Touch the center of each target and repeat this step for all
2.
four targets displayed.
Touch Yes to save the new settings.
3.
Settings Phone
➔ ➔ ➔
Settings Phone
➔ ➔ ➔
Note: When touching the screen in Calibration mode, you must touch the
center of the cross hair area.

Motion Detection

The Motion Detection feature can be used for muting an incoming
call or alarm, setting Snooze on an alarm, and starting and
restarting a timer.
From Idle mode, touch
1.
Motion Detection.
Touch On to activate the Motion Detection feature, or touch
2.
Off to deactivate it.
For more information on using Motion Detection on your phone,
see the following:
To mute the ringer - see "Other Answering Options" on page 30.
•
To mute an alarm - see "Turning Off an Alarm" on page 98.
•
To start or restart a timer - see "Timer" on page 101.
•
Auto Keypad Lock
The Auto Keypad Lock feature locks your phone when the
Backlight turns off. Press the
From Idle mode, touch
1.
Touch On or Off from the Auto Keypad Lock field.
2.
Settings Phone
➔ ➔ ➔
key to unlock the keypad.
Settings Phone.
➔ ➔
Changing Your Settings 112