Table of Contents
Advertisement
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or service provider.
From Idle mode, touch
1.
Network Profiles.
Touch one of these options:
2.
• TELUS Web
• TELUS MMS
To create a new connection, touch
3.
Select the parameter you want to edit:
4.
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP
connection: Normal, Secure, or None.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the
network.
• Protocol: set the connection protocol used by the WAP browser:
HTTP, WAP, or Other.
• Home URL: enter the URL address of the page to be used as
your homepage.
121
Settings
Connectivity
➔
➔
➔
.
Create
• Proxy Address: set the proxy server address and port.
• Gateway Address: (WAP only) enter the gateway address of the
proxy server.
• Secure Connection: (WAP only) enter secure connection
information.
• Linger Time (sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in
that time.
• Advanced Settings: allows you to configure some of the IP-
specific information: Static IP, Static DNS, Server information, and
Traffic Class.
– Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server,
remove the check mark.
– Local Phone IP: enter the IP address obtained from the network
operator, if you checked the Static IP option.
– Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
– Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
– Traffic Class: select the traffic class.
Note: The WAP settings may vary depending on the service provider.
Touch
to store these new settings.
5.
Save
Advertisement
Table of Contents
