Table of Contents
Advertisement
In Idle mode, you can also adjust the ringer volume using these
same keys.
In-Call Options
During an active call there are several functions available by
touching a corresponding onscreen button.
Speaker On/Off routes the phone's audio through either the speaker or
•
through the earpiece.
– Slide Speaker to On to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.)
– Slide Speaker to Off to use the phone's earpiece.
Mute/Unmute turn the onboard microphone either on or off.
•
– Touch Mute during a call to mute the microphone.
– Touch Unmute to unmute the microphone.
Dial to display the onscreen keypad, where you can choose to Save the
•
entered number to Contacts, Send a new text message, or initiate a new
call.
Hold to place the current active call on hold.
•
More to access additional in-call options such as:
•
– Contacts to display your current Contact entries.
– Save to Contacts to store the current phone number into your Contacts.
– Send Message to send a new text message.
– Memo to write a memo concerning this call.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
While on a call, touch Hold. This action places the current
1.
caller on hold (which is displayed onscreen as a
greyed-out box).
You can later reactivate this call by touching Resume.
2.
To make a new call while you have a call in progress:
Touch
.
1.
Hold
Touch
Contacts to look up a number in the
2.
➔
More
Contacts.
- or -
Touch
enter the new number
➔
Dial
Press
to dial the second number.
3.
Once connected, each call is displayed within either an In
call or On hold tab.
Note: The caller currently on hold appears within the On Hold tab.
.
➔
New Call
Call Functions
34
Advertisement
Table of Contents
