Advertisement
Automatic Toaster
Dear Customer,
Before using the appliance, the user must
read the following instructions carefully.
Connection to the mains supply
Th e appliance should only be connected to an
earthed socket installed in accordance with
the regulations.
Make sure that the supply voltage corresponds
to the voltage marked on the rating label.
Th is product complies with all binding CE
labelling directives.
Familiarisation
1.
Toast slot
2.
Operating lever
3.
Housing
4.
Continuously adjustable browning
control knob
5.
Eject button with main indicator lamp
6.
Warm-up function with indicator lamp
7.
Defrost function with indicator lamp
8.
Rating label (on underside of
appliance)
9.
Power cord storage (on underside of
appliance)
10. Crumb tray
11. Power cord with plug
12. Operating lever for warming top
13. Integral warming top
Important safety instructions
Th ere is always a danger that bread
may catch fi re, e.g. if it is toasted more
than once or comes into contact with
the heating elements. Th erefore ensure
that the appliance is not positioned or
operated in close proximity to curtains
or any such infl ammable materials.
Do not leave the appliance unattended
during use.
In order to prevent damage to the housing,
do not position the appliance on or near
hot surfaces or open fl ames such as hot-
plates or gas fl ames.
Caution : the accessible housing surfaces
become very hot during operation. Burns
can occur from touching the hot parts.
Always position the appliance on a level
heat-resistant surface.
Before the appliance is used, the main body
as well as any attachment fi tted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, it must
not be used any longer: even invisible
damage may have adverse eff ects on the
operational safety of the appliance.
Do not cover the toast slot during
operation.
Do not try to remove bread from the
toaster with your fi ngers or insert any
other objects (e.g. knives, forks) into the
toast slot as the heating elements carry a
live current.
Th e power cord should be regularly
examined for any signs of damage. In the
event of such damage being found, the
appliance must no longer be used.
Do not operate the appliance if excessive
force has been used to pull the power
cord. Damage cannot always be detected
from the outside; the entire unit should
therefore be checked by a qualifi ed
technician before it is used again.
Do not allow the power cord to touch hot
surfaces.
Do not let the power cord hang free.
Always remove the plug from the wall
socket
-
aft er use,
-
in case of any malfunction,
-
before cleaning the appliance.
When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
Th e appliance is not intended to be
operated by means of an external timer or
separate remote-control system
Th is appliance is not intended for use by
any persons (including children) with
reduced physical, sensory or mental
8
Advertisement
