Mercedes-Benz B-Class Operator's Manual page 259

must be affixed to the instrument cluster in the
driver's field of vision.
If a tire pressure of 200 kPa (2.0 bar/29 psi) has
been attained after ten minutes:
Switch off the tire inflation compressor.
X
Unscrew the filler hose from the valve of the
X
faulty tire.
Note that tire sealant may escape when you
unscrew the filler hose.
USA only: Stow the tire sealant bottle and the
X
tire inflation compressor.
Pull away immediately.
X
Stop after driving for approximately ten
X
minutes and check the tire pressure with the
tire inflation compressor.
The tire pressure must now be at least
130 kPa (1.3 bar/19 psi).
G
WARNING
If the required tire pressure is not reached
after driving for a short period, the tire is too
badly damaged. The tire sealant cannot repair
the tire in this instance. Damaged tires and a
tire pressure that is too low can significantly
impair the vehicle's braking and driving char-
acteristics. There is a risk of accident.
Do not continue driving. Contact a qualified
specialist workshop.
i
USA only: In cases such as the one men-
tioned above, contact an authorized
Mercedes-Benz Center. Or call
1-800-FOR-MERCedes (in the USA) or
1-800-387-0100 (in Canada).
USA only: Correct the tire pressure if it is still
X
at least 130 kPa (1.3 bar/19 psi). See the Tire
and Loading Information placard on the driv-
er's side B-pillar or the tire pressure table in
the fuel filler flap for values.
To increase the tire pressure: switch on the
X
tire inflation compressor.
To reduce the tire pressure: depress pres-
X
sure release button : next to pressure
gauge ;.
When the tire pressure is correct, unscrew the
X
filler hose from the valve of the sealed tire.
Note that tire sealant may escape when you
unscrew the filler hose.
Screw the valve cap onto the tire valve of the
X
sealed tire.
To remove the tire sealant bottle from the tire
X
inflation compressor, press together the lock-
ing tabs on the yellow cap.
Pull the tire sealant bottle out of the tire infla-
X
tion compressor.
The filler hose remains attached to the tire
sealant bottle.
Drive to the nearest qualified specialist work-
X
shop and have the tire changed there.
Have the tire sealant bottle and the filler hose
X
replaced as soon as possible at a qualified
specialist workshop.
Have the tire sealant bottle replaced every
X
four years at a qualified specialist workshop.
Flat tire
257
Z