Operational Instructions - Stamina 40-0058 Owner's Manual

OPERATIONAL INSTRUCTIONS

USING THE FITNESS METER
POWER ON :
Pedal movement or press the button.
POWER OFF :
Automatically shuts off after 4 minutes of
inactivity.
MODE/RESET BUTTON:
Press to select display functions, including SCAN, TIME,
COUNT, and CALORIES.
Press and hold for four seconds to reset all functions to zero.
FUNCTIONS:
SCAN:
Automatically scans each function of TIME, COUNT, and CALORIES in sequence changing
every six seconds. Press and release the button until the arrow appears on the display
and points to the SCAN.
TIME:
Displays the exercise time from 1 sec up to 99:59 minutes.
COUNT :
Displays the total number of strides you have taken from zero to 9999 strides.
CALORIES:
Displays the calorie burned from zero to 999.9 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
NOTE:
The meter will shut off automatically after four minutes of inactivity. All function values
will be kept. You can continue to work out with these function values. Or, press the
button and hold it down for four seconds to reset all functions to zero.
HOW TO INSTALL AND REPLACE BATTERIES:
1. Open the Battery Door on the back of the METER(1).
2. The METER(1) operates with two AA batteries (1.5V each), the
batteries are not included. Refer to the illustration to install or
replace the batteries.
NOTE: 1. Do not mix a new battery with an old battery.
2. Use the same type of battery. Do not mix an alkaline
battery with another type of battery.
3. Rechargeable batteries are not recommended.
4. Ultimate disposal of battery should be handled
according to all state and federal laws and regulations.
5. Do not dispose of batteries in fire.
9
AA Battery