FujiFilm Instax Square SQ 6 User's Manual / Troubleshooting page 45

5 Remove soil and dust from the lens, viewfinder window, etc. with an air blower and by wiping lightly with a piece of
soft cloth.
6 Do not use solvent such as thinner and alcohol to remove soil.
7 Keep the film chamber and camera interior clean to avoid damaging films.
8 In hot weather, do not leave your camera in a closed car or on the beach, and do not leave it in moist places.
9 Moth repellent gas such as naphthalene adversely affects your camera and films. Avoid keeping your camera or films in
a chest with mothballs.
0 Your camera is computer-controlled. If you should experience an operational issue, remove the batteries and then
reload them.
- Note that the temperature range within which your camera can be used is +5°C/+41°F to +40°C/+104°F.
INSTAX SQUARE FILM AND PRINT CARE
1 Keep the film in a cool and dry place. Do not leave the film in a place where the temperature is extremely high (e.g., in a
closed car).
2 When you load a film pack, use the film as soon as possible.
3 If the film has been kept in a place where the temperature is extremely high or low, bring it to room temperature
before starting to take pictures.
4 Be sure to use the film before the expiration or "Use Before" date.
5 Avoid airport checked luggage inspection and other strong X-ray illumination. The effect of fogging, etc. may appear
on unused film. We recommend that you carry the camera and/or the film onto the aircraft as carry-on luggage. (Check
with each airport for more information.)
6 Avoiding strong light, keep the developed prints in a cool and dry place.
7 Do not puncture, tear, or cut FUJIFILM Instant Film "instax SQUARE". If film becomes damaged, do not use.
EN
45