FujiFilm Instax Square SQ 6 User's Manual / Troubleshooting page 41

Problems
The picture is out of
1 The shooting distance is not
focus.
2 The lens is not clean.
3 Your camera was shaken when taking
The picture is blurred.
1 Picture was not permitted to develop
2 The picture did not come out smoothly.
● The shooting distance is too close to
The subject in the
viewfinder has shifted
in finished print.
● You looked into the viewfinder
The part seen from
the viewfinder is
not included in the
picture.
Possible Causes
appropriate.
the picture.
without touching, pressure being
applied or other interference once it
ejected from the camera.
the subject.
obliquely when taking the picture.
Solutions
1 Select the shooting mode according to the
distance.
2 Clean the lens.
3 Hold your camera firmly and press in the
shutter release button gently. Since the slow
shutter is selected when shooting indoors or
dark outdoors, stabilizing the camera using a
table, tripod, etc. is recommended.
1 Do not press onto or fold the picture.
2 Do not block the film exit with your finger.
● See notes on using Macro Mode.
● Look into the viewfinder from the front when
taking a picture.
EN
41