Activating Your Phone - Samsung Messager II GH68-23718A User Manual

Portable tri-band mobile phone
Table of Contents

Advertisement

Plug the large end of the Travel Adapter into a standard
1.
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Insert the smaller end of the Travel Adapter into the
2.
charger/accessory connector on the upper right side of
your phone.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Five bars (
) indicate a full charge.
) in the upper-right corner of the
An empty battery icon (
A blinking empty battery icon (
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.

Activating Your Phone

Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
With the phone
1.
closed, press and
hold the
key
until the display
lights.
Note: As with any other radio-
transmitting device, do not
touch the antenna while
using your phone as this
can affect call quality and
can cause the phone to
operate at a higher power
level than is necessary.
) indicates a near empty battery.
) and a tone sounding indicate you
Internal
Antenna
Getting Started
Press
& Hold
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Messager ii sch-r560 series

Table of Contents