Table of Contents
Advertisement
Repeat steps 3 and 4 as needed.
5.
Press
or
to save the new entry.
6.
Editing a Contacts Entry
Editing Contacts Name and Numbers
Find the Contacts entry you wish to change. See "Finding a
1.
Contacts Entry" on page 39 for more information.
Highlight the entry and press VIEW (
2.
Contact screen appears in the display showing the
highlighted entry's information.
Use the Up/Down navigation keys to review the information
3.
for the entry that you wish to change, then press EDIT (
or
). The Edit Contact screen appears in the display.
Highlight the particular information you want to add or
4.
change.
• To backspace and delete numbers or letters, press
• To clear all numbers or letters in the highlighted field, press and
hold
or
.
• For more options, press the Options soft key and the following
options pop-up in the display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial
number (see "Speed Dial" on page 46 for more information).
or
). The View
Add Pauses to Contacts Numbers
or
.
– Set as default — Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
– Wait — A hard pause (waits for input from you).
– 2-Sec Pause — A 2-second pause after which dialing resumes (see
"Add Pauses to Contacts Numbers" on page 42 for more
information).
Select the desired option.
When you're finished changing the contents of a field,
5.
press
or
. Your changes are saved and a
confirmation message appears in the display.
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
Wait — Stops the calling sequence until the phone receives further
•
input.
2-Sec Pause — Stops the calling sequence for two seconds, then
•
sends the remaining digits.
Understanding Your Contacts
42
Advertisement
Table of Contents
