Table of Contents
Advertisement
Note: The default lock code is the last four digits of your mobile phone
number.
Select Change Lock.
3.
The "New Lock Code" prompt appears in the display.
Enter the New Lock Code. You're prompted to re-enter the
4.
New Lock Code for verification.
Enter the new lock code again. Your changes are stored.
5.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Emergency #
You have the option of storing up to three emergency numbers to
your phone. Each number can be up to 32 digits in length. All
emergency numbers can be dialed any time, even when your
phone is locked or restricted.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
123
Important!: Because of various transmission methods, network parameters,
and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for essential or emergency calls.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
Store Emergency Numbers
From the Settings menu, select Phone Settings
1.
Security.
The "Enter Code" prompt appears in the display.
Enter the four-digit lock code using the keypad.
2.
Note: The default lock code is the last four digits of your mobile phone
number.
➔
Advertisement
Table of Contents
