Multiple Handset Use; Handset Locator; Join A Call In Progress - AT&T CL81114 User Manual

Multiple handset use

Multiple handset use

Handset locator

The handset locator feature is useful if you
misplace any handsets.
To start the paging tone:
• Press HANDSET LOCATOR on the
/
telephone base to start the paging tone on all
handsets for 60 seconds.
NOTE: If you press
handset, the ringer of that handset stops, but the paging
to the rest of the handsets continues.
To stop the paging tone:
• Press PHONE/
FLASH
any dialing key (0-9, TONE
handset(s).
-OR-
• Press HANDSET LOCATOR on the telephone base.
/

Join a call in progress

When a handset is already on a call and you would like to join the
call, press PHONE/
FLASH
To end the call using a handset, press
handset in the telephone base or charger. The call does not end
until all handsets hang up.
NOTE: You can use up to four system handsets at the same time on an
outside call.
OFF/ or MUTE/
CANCEL DELETE
, /SPEAKER SPEAKER, or
or #) on the
or /SPEAKER SPEAKER on your handset.
OFF/
32
on a
**Paging**
or place the
CANCEL