Table of Contents
Advertisement
Available languages
Available languages
24
English
Troubleshooting
Shaver
Problem
The appliance
does not work
when I press the
on/off button.
- The guarantee is not valid if a defect is due to
damage caused by incorrect use, poor
maintenance (e.g. parts blocked by scale) or if
alterations or repairs have been carried out by
persons not authorized by Philips Consumer
Lifestyle.
- For the appliance to be used correctly, the user
should strictly adhere to all instructions
included in the user manual and should abstain
from any actions or uses that are described as
undesired or which are warned against in the
user manual.
- These warranty restrictions do not affect your
statutory rights.
Possible cause
The appliance is still
attached to the wall
socket. For safety
reasons, the
appliance can only
be used without
cord.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
Solution
Unplug the appliance and
press the on/off button to
switch on the appliance.
Recharge the battery (see
'Charging').
Press the on/off button for
3 seconds to deactivate the
travel lock.
Clean the shaving heads
thoroughly or replace them.
Also see 'Hairs or dirt
obstruct the shaving heads'
for a detailed description of
how to clean the shaving
heads thoroughly.
Advertisement
Table of Contents
