Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung EV-1 Instruction Manual

Searching for and Storing the
Radio Stations
You can store up to:
15 FM stations
15 MW stations
7 LW stations
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing Band on the
remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4
Select the station to be stored by:
Pressing or buttons to increase or decrease the
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: 'Program No.' is displayed for a few seconds.
b Press Program/Set to store the radio station.
Result: 'Program No.' is no longer displayed and the station is
stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
5
VOL.
Program/
Set
4
VOL.
Mono/ST
).
Frequency Modulation
Medium Wave
Long Wave
Press Mode on the remote
Control
One or more times until Manual is
displayed.
One or more times until Auto is
displayed.
or buttons.
2
Band
3
4
Mode
Mode
Mute

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing Band on the
remote control.
3
Select the radio station as follows.
To listen to ... Press ...
Stored station 1. Press the Mode button on the remote
2. Press
VOL.
Program/
Set
Mode
3
Mode
VOL.
Mono/ST

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
Program/
Set
Mono/ST
) .
control until "Preset" is displayed.
or button to select the
required program.
2
Band
3
3
Mute
Band
VOL.
Mode
VOL.
Mute
14
GB